Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
322
Procedure
Call list show number can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure call list show number.
Parameter:
features.call_log_show_num
Web User Interface
Configure call list show number.
Navigate to:
http://<phoneIPAddress>/servlet?p
=features-general&q=load
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
features.call_log_show_num
0 or 1
0
Description:
Enables or disables the IP phone to show the other party’s phone number instead of the
name in the call log lists.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the IP phone will show the other party’s name in the call log lists.
If it is set to 1 (Enabled), the IP phone will show the other party’s phone number in the call
log lists.
Note: It works only if the value of the parameter “features.save_call_history” is set to 1
(Enabled).
Web User Interface:
Features->General Information->Call List Show Number
Phone User Interface:
None
To configure call list show number via web user interface:
1. Click on Features->General Information.