Yealink SIP-T2 Series

Configuring Basic Features
149
Parameters
Permitted Values
Default
None
Phone User Interface:
None
static.auto_provision.custom.sync.path
URL
Blank
Description:
Configures the URL for uploading/downloading the <MAC>-local.cfg file.
If it is left blank, the IP phone will try to upload/download the <MAC>-local.cfg file to/from
the root directory of provisioning server.
Note: It works only if the value of the parameter "static.auto_provision.custom.sync" is set to
1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
static.auto_provision.custom.upload_method
0 or 1
0
Description:
Configures the way the IP phone uploads the <MAC>-local.cfg file to the provisioning server
(for HTTP/HTTPS server only).
0-PUT
1-POST
Note: It works only if the value of the parameter “static.auto_provision.custom.sync” is set to
1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
For more information on how to configure these parameters in different scenarios, refer to the
following introduced scenarios.