Yealink SIP-T2 Series

Configuring Basic Features
163
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
phone_setting.common_power_led_enable
0 or 1
0
Description:
Enables or disables the power indicator LED to be turned on.
For
SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/T23
P/T23G/T21(P) E2 IP phones:
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid red)
For SIP-T19(P) E2 IP phones:
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid yellow)
Web User Interface:
Features->Power LED->Common Power Light On
Phone User Interface:
None
phone_setting.ring_power_led_flash_enable
0 or 1
1
Description:
Enables or disables the power indicator LED to flash when the IP phone receives an
incoming call.
For
SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/T23
P/T23G/T21(P) E2 IP phones:
0-Disabled (power indicator LED does not flash)
1-Enabled (power indicator LED fast flashes (300ms) red)
For SIP-T19(P) E2 IP phones:
0-Disabled (power indicator LED does not flash)
1-Enabled (power indicator LED fast flashes (300ms) yellow)
Web User Interface:
Features->Power LED->Ringing Power Light Flash
Phone User Interface:
None