Yealink SIP-T2 Series

Configuring Basic Features
177
=settings-preference&q=load
Phone User Interface
Configure the transparency of the
LCD screen.
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
phone_setting.idle_dsskey_and_title.transparency
0%, 20%, 40%,
60%, 80% or 100%
100%
Description:
Configures the transparency of the DSS key labels and status bar on the idle screen for the IP
phone.
If it is set to 0%, the DSS key labels and status bar are non-transparent.
Example:
phone_setting.idle_dsskey_and_title.transparency = 80%
Note: It is also applicable when the DSS key list is unfolded. It is only applicable to
SIP-T48G/T48S IP phones.
Web User Interface:
Settings->Preference->Transparency
Phone User Interface:
Menu->Basic->Display->Transparency
To change the transparency via web user interface (take SIP-T48G IP phones for example):
1. Click on Settings->Preference.
2. Select the desired value from the pull-down list of Transparency.
3. Click Confirm to accept the change.
To change the transparency via phone user interface:
1. Tap ->Basic->Display->Transparency.
2. Tap the gray box of the Transparency field, and then select the desired value from the
pull-down list.
3. Tap the Save soft key to accept the change.