Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
184
2. Select System from the pull-down list of Screensaver Type.
3. Click Confirm to accept the change.
To configure the screen saver wait time and screensaver display clock via web user
interface:
1. Click on Settings->Preference.
2. Select the desired time from the pull-down list of Screensaver Wait Time.
3. Select the desired value from the pull-down list of ScreenSaver Display Clock.
4. Click Confirm to accept the change.
To configure the screen saver via phone user interface:
1. Press Menu->Basic->Display->Screensaver.
2. Press or , or the Switch soft key to select the desired wait time from the Wait