Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
246
Available Language
Associated Language Pack
German
004.GUI.German.lang
Italian
005.GUI.Italian.lang
Polish
006.GUI.Polish.lang
Portuguese
007.GUI.Portuguese.lang
Spanish
008.GUI.Spanish.lang
Turkish
009.GUI.Turkish.lang
Russian
010.GUI.Russian.lang
When adding a new language pack for the phone user interface, the language pack must be
formatted as “X.GUI.name.lang” (X starts from 011, “name” is replaced with the language name).
If the language name is the same as the existing one, the existing language pack will be
overridden by the new uploaded one. We recommend that the filename of the new language
pack should not be the same as the existing one.
To customize a language file:
1. Open the desired language template file (e.g., 000.GUI.English.lang) using an ASCII editor.
2. Modify the characters within the double quotation marks on the right of the equal sign.
Don’t modify the translation item on the left of the equal sign.
The following shows a portion of the language pack “000.GUI.English.lang” for the phone
user interface (take SIP-T46G IP phones for example):

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English