Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
308
Web User Interface
Configure the hotline number.
Specify the time the IP phone waits
before automatically dialing out the
hotline number.
Navigate to:
http://<phoneIPAddress>/servlet?p
=features-general&q=load
Phone User Interface
Configure the hotline number.
Specify the time the IP phone waits
before automatically dialing out the
hotline number.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.hotline_number
String within 32 characters
Blank
Description:
Configures the hotline number that the IP phone automatically dials out when you lift the
handset, press the Speakerphone key or the line key.
Leaving it blank disables hotline feature.
Example:
features.hotline_number = 1234
Note: Line key is not applicable to SIP-T19(P) E2.
Web User Interface:
Features->General Information->Hotline Number
Phone User Interface:
Menu->Features->Others->Hot Line->Hotline Number
features.hotline_delay
Integer from 0 to 10
4
Description:
Configures the waiting time (in seconds) for the IP phone to automatically dial out the
hotline number.
If it is set to 0 (0s), the IP phone will immediately dial out the preconfigured hotline number
when you lift the handset, press the Speakerphone key or press the line key.
If it is set to a value greater than 0, the IP phone will wait the designated seconds before
dialing out the predefined hotline number when you lift the handset, press the
Speakerphone key or press the line key.

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English