Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
312
directory template online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage. For more
information on obtaining the directory template, refer to Obtaining Boot Files/Configuration
Files/Resource Files on page 131.
The following table lists meaning of each variable in the directory template file:
Element
Attribute
Description
root_favorite_set
no
File root element
item
no
Directory list’s root element
id_name
localdirectory
history
networkcalllog
remotedirectory
ldap
broadsoftdirectory
plcmdirectory
The existing directory list (For
example, “localdirectory” for the
local directory list).
Note: Do not edit this field.
display_name
Local Directory
History
Network CallLog
Remote Phone Book
LDAP
Network Directories
PhoneBook
The display name of the
directory list.
Note: We recommend you do
not edit this field. Network
Directories and Network CallLog
lists are hidden for IP phones in
neutral firmware, which are
designed for the BroadWorks
environment.
priority
1, 2, 3, 4, 5, 6 and 7.
1 is the highest priority, 7 is
the lowest.
The display priority of the
directory list.
enable
0/1,
0: Disabled
1: Enabled.
Directory list whether to display
on the IP phone LCD screen.
dev
common;
T21 T23 T40 T27 T27G T29
T41 T42 T42S T41S T46
T46S T48 T48S.
The applicable phone models of
the directory list. Common
represents that the desired
directory list is applicable to all
IP phone models.
Note: Do not edit this field.
Customizing a directory template:
1. Open the template file using an ASCII editor.
2. For each directory list that you want to configure, edit the corresponding string in the file.

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English