Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
372
Procedure
Call completion can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure call completion.
Parameter:
features.call_completion_enable
Web User Interface
Configure call completion.
Navigate to:
http://<phoneIPAddress>/servlet?p
=features-general&q=load
Phone User Interface
Configure call completion.
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
features.call_completion_enable
0 or 1
0
Description:
Enables or disables call completion feature. If a user places a call and the callee is
temporarily unavailable to answer the call, call completion feature allows notifying the user
when the callee becomes available to receive a call.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the caller is notified when the callee becomes available to receive a
call.
Web User Interface:
Features->General Information->Call Completion
Phone User Interface:
Menu->Features->Others->Call Completion->Call Completion
To configure call completion via web user interface:
1. Click on Features->General Information.