Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
420
Configure forward international.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.fwd.allow
0 or 1
1
Description:
Enables or disables the call forward feature.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), call forward feature cannot be activated and users are not allowed
to configure call forward feature on the phone.
Web User Interface:
None
Phone User Interface:
None
features.fwd_mode
0 or 1
0
Description:
Configures the call forward mode for the IP phone.
0-Phone
1-Custom
If it is set to 0 (Phone), call forward feature is effective for the IP phone.
If it is set to 1 (Custom), you can configure call forward feature for each or all accounts.
Note: It is not applicable to SIP-T19(P) E2 IP phones. It works only if the value of the
parameter “feautes.fwd.allow” is set to 1 (Enabled).
Web User Interface:
Features->Forward&DND->Forward->Mode
Phone User Interface:
None
account.X.always_fwd.enable
0 or 1
0
Description:
Triggers always forward feature to on or off for account X.
0-Off
1-On