Yealink SIP-T2 Series User Manual

Configuring Basic Features
423
Parameters
Permitted Values
Default
SIP-T19(P) E2 IP phones.
Web User Interface:
Features->Forward&DND->Forward->Always Forward->Off Code
Phone User Interface:
Menu->Features->Call Forward->Always Forward->Off Code
account.X.busy_fwd.enable
0 or 1
0
Description:
Triggers busy forward feature to on or off for account X.
0-Off
1-On
If it is set to 1 (On), incoming calls to the account X are forwarded to the destination number
(configured by the parameter “account.X.busy_fwd.target”) when the callee is busy.
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Note: It works only if the value of the parameter “features.fwd.allow” is set to 1 (Enabled)
and value of the parameter “features.fwd_mode” is set to 1 (Custom). It is not applicable to
SIP-T19(P) E2 IP phones.
Web User Interface:
Features->Forward&DND->Forward->Busy Forward->On/Off
Phone User Interface:
Menu->Features->Call Forward->Busy Forward->Busy Forward
account.X.busy_fwd.target
String within 32
characters
Blank
Description:
Configures the destination number of the busy forward for account X.
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Example:

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English