Yealink SIP-T2 Series

Configuring Basic Features
465
Parameters
Permitted Values
Default
Example:
features.pickup.group_pickup_code = *98
Note: The group call pickup code configured on a per-line basis (configured by the
parameter “account.X.group_pickup_code”) takes precedence over that configured on a
phone basis (configured by the parameter “features.pickup.group_pickup_code”).
Web User Interface:
Features->Call Pickup->Group Call Pickup Code
Phone User Interface:
None
Group Call Pickup Key
For more information on how to configure the DSS Key, refer to Appendix D: Configuring DSS
Key on page 948.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
linekey.X.type/ programablekey.X.type/
expansion_module.X.key.Y.type
23
Refer to the
following content
Description:
Configures a DSS key as a group call pickup key on the IP phone.
The digit 23 stands for the key type Group Pickup.
For line keys:
X ranges from 1 to 29 (for SIP-T48G/S)
X ranges from 1 to 27 (for SIP-T46G/T46S/T29G)
X ranges from 1 to 15 (for SIP-T42G/T42S/T41P/T41S)
X ranges from 1 to 21 (for SIP-T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
For programable keys:
X=1-10, 12-14 (for SIP-T48G/T48S/T46G/T46S)
X=1-10, 13 (for SIP-T42G/T42S/T41P/T41S/T40P/T40G)
X=1-14 (for SIP-T29G/T27P/T27G)
X=1-10, 14 (for SIP-T23P/T23G/T21(P) E2)
X=1-9, 13, 14 (for SIP-T19(P) E2)