Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
574
Parameters
Permitted Values
Default
Description:
Enables or disables the IP phone to display a visual alert when the monitored user receives
an incoming call.
0-Disabled
1-Enabled
Note: It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Features->Call Pickup->Visual Alert for BLF Pickup
Phone User Interface:
None
features.pickup.blf_audio_enable
0 or 1
0
Description:
Enables or disables the IP phone to play an audio alert when the monitored user receives
an incoming call.
0-Disabled
1-Enabled
Note: It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Features->Call Pickup->Audio Alert for BLF Pickup
Phone User Interface:
None
features.blf.ring_type
Refer to the following
content
Splash.wav
Description:
Configures a ring tone for BLF pickup.
Permitted Values:
Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav, Ring8.wav,
Silent.wav, Splash.wav or custom ring tone name (e.g., Customring.wav).
Example:
features.blf.ring_type = Ring5.wav
Note: It works only if the value of the parameter “features.pickup.blf_audio_enable” is set
to 1 (Enabled). It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface: