Yealink SIP-T2 Series User Manual

Configuring Advanced Features
577
Line Key/Expansion Module Key LED (configured as a BLF key or a BLF List key and BLF LED
Mode is set to 3)
LED Status
Description
Fast-flashing green
(200ms)
The monitored user receives an incoming call.
Solid red
The monitored user is dialing.
The monitored user is talking.
The monitored user’s conversation is placed on hold (This
LED status requires server support).
Slow-flashing red (1s)
The call is parked against the monitored user’s phone
number.
Off
The monitored user is idle.
The monitored user does not exist.
Line Key/Expansion Module Key LED (configured as a BLF key or a BLF List key and BLF LED
Mode is set to 4. This mode is specifically designed for the Genband server.)
LED Status
Description
Solid green
The monitored user is talking.
Slow-flashing green (1s)
The monitored user does not exist.
Off
The monitored user is idle.
Procedure
BLF LED mode can be configured using the following methods.
Central
Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure BLF LED mode.
Parameter:
features.blf_led_mode
Web User Interface
Configure BLF LED mode.
Navigate to:
http://<phoneIPAddress>/servlet?p=f
eatures-general&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.blf_led_mode
0, 1, 2, 3 or 4
0
Description:
Configures BLF LED mode and provides five kinds of definition for the BLF/BLF List key LED

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English