Yealink SIP-T2 Series

Configuring Advanced Features
583
Parameters
Permitted Values
Default
and then goes out when the monitored user is ringing.
Note: It is not applicable to SIP-T19(P) E2 IP phones. It works only if the value of the
parameter “blf.enhanced.callin.enable” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
blf.enhanced.callin.idle.action
String
Blank
Description:
Configures the behavior when pressing the BLF/BLF list key if the monitor is idle and
monitored user is ringing.
Example:
blf.enhanced.callin.idle.action = newcall
Note: It is not applicable to SIP-T19(P) E2 IP phones. It works only if the value of the
parameter “blf.enhanced.callin.enable” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
blf.enhanced.callin.callin.action
String
Blank
Description:
Configures the behavior when pressing the BLF/BLF list key if the monitor and monitored
user are ringing.
Example:
blf.enhanced.callin.callin.action = newcall
Note: It is not applicable to SIP-T19(P) E2 IP phones. It works only if the value of the
parameter “blf.enhanced.callin.enable” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
blf.enhanced.callin.talking.action
String
Blank