Yealink SIP-T2 Series User Manual

Configuring Advanced Features
589
Parameters
Permitted Values
Default
parameter “blf.enhanced.parked.enable” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
blf.enhanced.parked.idle.action
String
Blank
Description:
Configures the behavior when pressing the BLF/BLF list key if the monitor is idle and a call
is being parked against the monitored phone.
Example:
blf.enhanced.parked.idle.action = newcall
Note: It is not applicable to SIP-T19(P) E2 IP phones. It works only if the value of the
parameter “blf.enhanced.parked.enable” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
blf.enhanced.parked.callin.action
String
Blank
Description:
Configures the behavior when pressing the BLF/BLF list key if the monitor is ringing and a
call is being parked against the monitored phone.
Example:
blf.enhanced.parked.callin.action = newcall
Note: It is not applicable to SIP-T19(P) E2 IP phones. It works only if the value of the
parameter “blf.enhanced.parked.enable” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
blf.enhanced.parked.talking.action
String
Blank

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English