Configuring Advanced Features
595
X ranges from 1 to 21 (for SIP-T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
For ext keys:
For SIP-T48G/T48S/T46G/T46S:
X ranges from 1 to 6, Y ranges from 1 to 40.
For SIP-T29G/T27P/T27G:
X ranges from 1 to 6, Y ranges from 1 to 20, 22 to 40 (Ext key 21 cannot be configured).
Note: It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Dsskey->Line Key->Label
Phone User Interface:
Menu->Features->DSS Keys->Line Key X->Label
To configure a BLF key via web user interface:
1. Click on Dsskey->Line Key.
2. In the desired DSS key field, select BLF from the pull-down list of Type.
3. Enter the phone number or extension you want to monitor in the Value field.
4. Select the desired line from the pull-down list of Line.
5. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
6. (Optional.) Enter the directed call pickup code in the Extension field.
7. Click Confirm to accept the change.
To configure a BLF key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select BLF from the Type field.
4. Press or , or the Switch soft key to select the desired line from the Account ID
field.
5. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
To Next Page
Loading...
Need help?
General
