Yealink SIP-T2 Series

Configuring Advanced Features
615
Parameters
Permitted Values
Default
Note: It works only if the value of the parameter “account.X.shared_line” is set to 1 (Share
Call Appearance). It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Account->Advanced->Call Pull Feature Access Code
Phone User Interface:
None
Private Hold Soft Key
Configuring the private hold soft key may affect the softkey layout in the Talking state. For more
information, refer to Softkey Layout on page 264.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
phone_setting.custom_softkey_enable
0 or 1
0
Description:
Enables or disables custom soft keys layout feature.
0-Disabled
1-Enabled
Web User Interface:
Settings->Softkey Layout->Custom Softkey
Phone User Interface:
None
custom_softkey_talking.url
URL within 511 characters
Blank
Description:
Configures the access URL of the custom file for the soft key presented on the LCD screen
when in the Talking state.
Example:
custom_softkey_talking.url = http://192.168.1.20/XMLfiles/Talking.xml
During the auto provisioning process, the IP phone connects to the provisioning server
“192.168.1.20”, and downloads the Talking state file from the “XMLfiles” directory.
Web User Interface:
None