Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
634
Configure the channel of the multicast
paging group for a paging list key.
Parameter:
multicast.paging_address.X.channel
Assign a multicast paging key.
Parameters:
linekey.X.type/ programablekey.X.type/
expansion_module.X.key.Y.type
linekey.X.value/ programablekey.X.value/
expansion_module.X.key.Y.value
linekey.X.label/ programablekey.X.label/
expansion_module.X.key.Y.label
linekey.X.extension/
programablekey.X.extension/
expansion_module.X.key.Y.extension
Assign a paging list key.
Parameter:
linekey.X.type/ programmable.X.type/
expansion_module.X.key.Y.type
linekey.X.label/ programmable.X.label/
expansion_module.X.key.Y.label
Web User Interface
Specify a multicast codec for the IP phone to
send the RTP stream.
Navigate to:
http://<phoneIPAddress>/servlet?p=feature
s-general&q=load
Configure the multicast IP address and port
number for a paging list key.
Configure the multicast paging group name
for a paging list key.
Configure the channel of the multicast
paging group for a paging list key.
Navigate to:
http://<phoneIPAddress>/servlet?p=contact
s-multicastIP&q=load
Assign a multicast paging key or a paging list
key.
Navigate to: