Yealink SIP-T2 Series - Page 684

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
660
Parameters
Permitted Values
Default
Note: It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Dsskey->Line Key->Label
Phone User Interface:
Menu->Features->DSS Keys->Line Key X->Label
URL Record Key
Parameters
Permitted Values
Default
linekey.X.type/
expansion_module.X.key.Y.type
35
Refer to the following
content
Description:
Configures a DSS key as a URL record key on the IP phone.
The digit 35 stands for the key type URL Record.
For line keys:
X ranges from 1 to 29 (for SIP-T48G/S)
X ranges from 1 to 27 (for SIP-T46G/T46S/T29G)
X ranges from 1 to 15 (for SIP-T42G/T42S/T41P/T41S)
X ranges from 1 to 21 (for SIP-T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
For ext keys:
For SIP-T48G/T48S/T46G/T46S:
X ranges from 1 to 6, Y ranges from 1 to 40.
For SIP-T29G/T27P/T27G:
X ranges from 1 to 6, Y ranges from 1 to 20, 22 to 40 (Ext key 21 cannot be configured).
Example:
linekey.2.type = 35
Default:
For line keys:
For SIP-T48G/S IP phones:
The default value of the line key 1-16 is 15, and the default value of the line key 17-29 is 0.
For SIP-T46G/T46S/T29G IP phones: