Yealink SIP-T2 Series - Page 695

Configuring Advanced Features
671
hotdesking.startup_password_enable
hotdesking.startup_sip_server_enable
hotdesking.startup_outbound_enable
Web User Interface
Configure the logon wizard.
Navigate to:
http://<phoneIPAddress>/servlet?p=feature
s-general&q=load
Details of the Configuration Parameters:
Parameters
Permitted Values
Default
phone_setting.logon_wizard
0 or 1
0
Description:
Enables or disables the IP phone to provide the logon wizard during the first startup.
0-Disabled
1-Enabled
Note: It works only if there is no registered account on the IP phone.
Web User Interface:
Features->General Information->Logon Wizard
Phone User Interface:
None
hotdesking.startup_register_name_enable
0 or 1
0
Description:
Enables or disables the IP phone to provide input field of register name on the logon wizard
during the first startup.
0-Disabled
1-Enabled
Note: It works only if there is no registered account on the IP phone and the value of the
parameter “phone_setting.logon_wizard” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
hotdesking.startup_username_enable
0 or 1
1