Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
694
Example of a SIP Notify with the variable value (OK):
Message Header
NOTIFY sip:3583@10.2.40.10:5062 SIP/2.0
Via: SIP/2.0/UDP 10.2.40.27:5063;branch=z9hG4bK4163876675
From: <sip:3586@10.2.1.48>;tag=2900480538
To: "3583" <sip:3583@10.2.1.48>;tag=490600926
Call-ID: 2923387519@10.2.40.10
CSeq: 4 NOTIFY
Contact: <sip:3586@10.2.40.27:5063>
Max-Forwards: 70
User-Agent: Yealink SIP-T46G
Event: ACTION-URI
Content-Type: message/sipfrag
Content-Length: 6
Message Body
key=OK
The following table lists pre-defined variable values:
Variable Value
Phone Action
OK
Press the OK/√ key.
ENTER
Press the Enter soft key.
SPEAKER
Press the Speakerphone key.
F_TRANSFER
Transfers a call to another party.
VOLUME_UP
Increase the volume.
VOLUME_DOWN
Decrease the volume.
MUTE
Mute a call.
F_HOLD/HOLD
Place an active call on hold.
F_CONFERENCE
Press the Conf soft key.
Cancel/CANCEL
Cancel actions or reject incoming calls or end a
call.
X
Cancel actions or reject incoming calls or mute
or un-mute calls.
0-9/*/POUND
Press the keypad (0-9, * or #).

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English