Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
718
IN NAPTR 90 50 "s" "SIP+D2T" "" _sip._tcp.yealink.pbx.com
IN NAPTR 100 50 "s" "SIP+D2U" "" _sip._udp.yealink.pbx.com
Parameters are explained in the following table:
Parameter
Description
order
Specify preferential treatment for the specific record. The order is from
lowest to highest, lower order is more preferred.
pref
Specify the preference for processing multiple NAPTR records with the
same order value. Lower value is more preferred.
Flags
The flag “s” means to perform an SRV lookup.
service
Specify the transport protocols:
SIP+D2U: SIP over UDP
SIP+D2T: SIP over TCP
SIP+D2S: SIP over SCTP
SIPS+D2T: SIPS over TCP
regexp
Always empty for SIP services.
replacement
Specify a domain name for the next query.
The IP phone picks the first record because its order of 90 is lower than 100. The pref parameter
is unimportant as there is no other record with order 90. The flag “s” indicates performing the
SRV query next. TCP will be used, targeted to a host determined by an SRV query of
“_sip._tcp.yealink.pbx.com”. If the flag of the NAPTR record returned is empty, the IP phone will
perform NAPTR query again according to the previous NAPTR query result.
SRV (Service Location Record)
The IP phone performs an SRV query on the record returned from the NAPTR for the host name
and the port number. Example of SRV records:
Priority Weight Port Target
IN SRV 0 1 5060 server1.yealink.pbx.com
IN SRV 0 2 5060 server2.yealink.pbx.com
Parameters are explained in the following table:
Parameter
Description
Priority
Specify preferential treatment for the specific host entry. Lower
priority is more preferred.
Weight
When priorities are equal, weight is used to differentiate the
preference. The preference is from highest to lowest. Keep the same
to load balance.

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English