Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
774
Configure a ring tone on a per-line basis.
Navigate to:
http://<phoneIPAddress>/servlet?p=accou
nt-basic&q=load&acc=0
Phone User Interface
Configure a ring tone for the IP phone.
Configure a ring tone for the account.
Details of the Configuration Parameters:
Parameters
Permitted Values
Default
phone_setting.ring_type
Refer to the following
content
Ring1.wav
Description:
Configures a ring tone for the IP phone.
Permitted Values:
Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav, Ring8.wav,
Silent.wav, Splash.wav or custom ring tone name (e.g., Customring.wav).
Example:
phone_setting.ring_type = Ring1.wav
Web User Interface:
Settings->Preference->Ring Type
Phone User Interface:
Menu->Basic->Sound->Ring Tones->Common
account.X.ringtone.ring_type
Refer to the following
content
Common
Description:
Configures a ring tone for account X.
Permitted Values:
Common, Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav,
Ring8.wav, Silent.wav, Splash.wav or custom ring tone name (e.g., Customring.wav).
Example:
account.1.ringtone.ring_type = Ring3.wav
It means account1 will use the Ring3.wav as the ring tone.
account.1.ringtone.ring_type = Common
It means account1 will use the ring tone selected for the IP phone configured by the
parameter “phone_setting.ring_type”.
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)