Yealink SIP-T2 Series - Page 802

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
778
3) Alert-Info: <URL>
4) Alert-Info: info=info text;x-line-id=0
1) Alert-Info: Bellcore-drN
When the Alter-Info header contains the keyword “Bellcore-drN”, the IP phone will play the
desired ring tone.
The following table identifies the corresponding ring tone:
Value of N
Ring Tone
(features.alert_info_tone = 1)
Ring Tone
(features.alert_info_tone = 0)
1
Bellcore-dr1
Ring1.wav
2
Bellcore-dr2
Ring2.wav
3
Bellcore-dr3
Ring3.wav
4
Bellcore-dr4
Ring4.wav
5
Bellcore-dr5
Ring5.wav
6
Ring6.wav
7
Ring7.wav
8
Ring8.wav
9
Silent.wav
10
Splash.wav
N<1 or
N>10
Ring1.wav
Examples:
Alert-Info: http://127.0.0.1/Bellcore-dr1
Alert-Info: test/Bellcore-dr1
Alert-Info: Bellcore-dr1
Alert-Info: Bellcore-dr1;x-line-id=1
Alert-Info: <http://10.1.0.31>;info=Bellcore-dr1