Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
780
Alert-Info: <http://10.1.0.31>;info=ringtone-2
Alert-Info: <http://127.0.0.1/ringtone-2>
Alert-Info: MyMelody2
Alert-Info: MyMelody2;x-line-id=1
Alert-Info: <http://10.1.0.31>;x-line-id=0;info=MyMelody2
The following table identifies the corresponding local ring tone:
Value of N
Ring Tone
1
Ring1.wav
2
Ring2.wav
3
Ring3.wav
4
Ring4.wav
5
Ring5.wav
6
Ring6.wav
7
Ring7.wav
8
Ring8.wav
9
Silent.wav
10
Splash.wav
N<1 or N>10
Ring1.wav
3) Alert-Info: <URL>
When the Alert-Info header contains a remote URL, the IP phone will try to download the WAV
ring tone file from the URL and then play the remote ring tone if the value of the parameter
“account.X.alert_info_url_enable” is set to 1 (or the item called “Distinctive Ring Tones” on the
web user interface is Enabled), or play the preconfigured local ring tone in about 10 seconds if
the value of the parameter “account.X.alert_info_url_enable” is set to 0 or if the IP phone fails to
download the remote ring tone.
Example:
Alert-Info: http://192.168.0.12:8080/Custom.wav
4) Alert-Info: info=info text;x-line-id=0
When the Alert-Info header contains an info text, the IP phone will map the text with the Internal
Ringer Text preconfigured (or the value of the parameter “distinctive_ring_tones.alert_info.X.text”
is configured) on the IP phone, and then play the ring tone associated with the Internal Ringer

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English