EasyManua.ls Logo

Yealink SIP-T2 Series

Yealink SIP-T2 Series
1056 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuring Audio Features
843
Navigate to:
http://<phoneIPAddress>/servlet?p=set
tings-voicemonitoring&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
voice.rtcp_xr.enable
0 or 1
0
Description:
Enables or disables the IP phone to send RTCP-XR packets.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Settings->Voice Monitoring->Voice RTCP-XR Report
Phone User Interface:
None
To configure RTCP-XR feature via web user interface:
1. Click on Settings->Voice Monitoring.
2. Select the desired value from the pull-down list of Voice RTCP-XR Report.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.

Table of Contents

Other manuals for Yealink SIP-T2 Series

Related product manuals