Yealink SIP-T2 Series

Configuring Audio Features
851
Parameters
Permitted
Values
Default
Web User Interface:
Settings->Voice Monitoring->Report options on phone->Local User
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_remote_call_id.enable
0 or 1
1
Description:
Enables or disables the phone to display Remote User on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Web User Interface:
Settings->Voice Monitoring->Report options on phone->Remote User
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_local_codec.enable
0 or 1
1
Description:
Enables or disables the phone to display Local Codec on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Web User Interface:
Settings->Voice Monitoring->Report options on phone->Local Codec
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_remote_codec.enable
0 or 1
1
Description:
Enables or disables the phone to display Remote Codec on the LCD screen.
0-Disabled
1-Enabled