Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
854
Parameters
Permitted
Values
Default
phone_setting.vq_rtcpxr_display_moslq.enable
0 or 1
1
Description:
Enables or disables the phone to display MOS-LQ on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Web User Interface:
Settings->Voice Monitoring->Report options on phone->MOS-LQ
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_moscq.enable
0 or 1
1
Description:
Enables or disables the phone to display MOS-CQ on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Web User Interface:
Settings->Voice Monitoring->Report options on phone->MOS-CQ
Phone User Interface:
None
account.X.vq_rtcpxr.collector_name
String
within 32
characters
Blank
Description:
Configures the host name of the central report collector that accepts voice quality reports
contained in SIP PUBLISH messages for account X.
X ranges from 1 to 16 (for SIP-T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)