Configuring Audio Features
857
3. Enter the desired value in the Period for Interval Report field.
4. Click Confirm to accept the change.
To configure alert report for VQ-RTCPXR via web user interface:
1. Click on Settings->Voice Monitoring.
2. Enter the desired value in the Warning threshold for Moslq field.
3. Enter the desired value in the Critical threshold for Moslq field.
4. Enter the desired value in the Warning threshold for Delay field.
5. Enter the desired value in the Critical threshold for Delay field.
6. Click Confirm to accept the change.
To configure RTP status displayed on the web page via web user interface:
1. Click on Settings->Voice Monitoring.
To Next Page
Loading...
Need help?
General
