Yealink SIP-T2 Series

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
960
Example
linekey.1.type = 8
Parameter-
linekey.X.line
Configuration File
<y0000000000xx>.cfg
Parameter-
programablekey.X.line
Parameter-
expansion_module.X.key.Y.line
Description
Configures the desired line to apply the key
feature. (not applicable to SIP-T19(P) E2 IP phones)
For line keys:
X ranges from 1 to 29 (for SIP-T48G/S)
X ranges from 1 to 27 (for SIP-T46G/T46S/T29G)
X ranges from 1 to 15 (for
SIP-T42G/T42S/T41P/T41S)
X ranges from 1 to 21 (for SIP-T27P/T27G)
X ranges from 1 to 3 (for
SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
For programable keys:
X=1-10, 12-14 (for SIP-T48G/T48S/T46G/T46S)
X=1-10, 13 (for
SIP-T42G/T42S/T41P/T41S/T40P/T40G)
X=1-14 (for SIP-T29G/T27P/T27G)
X=1-10, 14 (for SIP-T23P/T23G/T21(P) E2)
For ext keys (only applicable to
SIP-T48G/T48S/T46G/T46S/T29G/T27P/T27G IP
phones):
For SIP-T48G/T48S/T46G/T46S:
X ranges from 1 to 6, Y ranges from 1 to 40.
For SIP-T29G/T27P/T27G:
X ranges from 1 to 6, Y ranges from 1 to 20, 22 to
40 (Ext key 21 cannot be configured).
When assigning the following features, you do not
need to configure this parameter:
1-Conference