| Getting Started | 15
•
Rear Panel of VC800 Codec
Front Panel of VC800 Codec
The LED indicator in front of the camera indicates different camera status.
Related information
LED Instructions of VC880/VC800/VC500/VC200/PVT980/PVT950
Rear Panel of VC800 Codec
Port Name Description
①
Line Out Connect to an audio output device via an
audio cable (3.5mm).
②
Line In Connect to an audio input device via an
audio cable (3.5mm).
③
USB
• Connect to a USB flash drive.
Insert a USB flash drive for storing
screenshots, recording videos or
capturing packets. If multiple USB flash
drives are connected, only the latter one
can be identified.
• Insert a WF50 Wi-Fi USB Dongle
for connecting to Wi-Fi or providing
wireless AP.
• Insert a BT42 Bluetooth USB Dongle
for connecting to the CPW90-BT
Bluetooth wireless microphones.
• Insert a PSTN box CPN10 for
connecting to the PSTN (Public
Switched Telephone Network).
④
VC Hub/Phone
• If you want to use wired sharing to
present, connect this port to the Codec
port on the VCH50 video conferencing
hub.
• If you need an audio device, connect this
port to the Internet port on the CP960
Conference phone.
• Connect to VCM34.
⑤
HDMI Connect to a monitor.
⑥
Internet Connect to the network device.
To Next Page
Loading...
