| Configuring the Meeting Room | 174
• If you import an 8 ways multipoint license to the VC800/VC880 system, X+Y<=8. Two virtual meeting rooms
supports up to 8 ways video calls.
• If you import an 16 ways multipoint license to the VC800/VC880 system, X+Y<=16. Two virtual meeting rooms
supports up to 16 ways video calls.
• If you import an 24 ways multipoint license to the VC800/VC880 system, X+Y<=24. Two virtual meeting rooms
supports up to 24 ways video calls.
Note:
When you import an 8 or 16 ways multipoint license to the VC880/VC880 system, virtual meeting room 1
provides additional 5 voice calls.
•
Selecting VMR Mode Conference
Selecting VMR Mode Conference
VMR mode conference provides virtual meeting room 1 and 2. You can allocate the MCU ways between two virtual
meeting rooms respectively.
Procedure
1.
On your web user interface, go to Setting > Built-in MCU Setting > Conference Setting.
2.
Select VMR Mode from the drop-down menu of Conference Type.
3.
Configure and save the following settings:
Parameter Description Configuration Method
Multipoint Allocation -
>Virtual Meeting Room 1
Allocates the maximum ways of
video calls for virtual meeting
room 1.
Web user interface
Multipoint Allocation -
>Virtual Meeting Room 2
Allocates the maximum ways of
video calls for virtual meeting
room 2.
Web user interface
To Next Page
Loading...
