16-7
IM WT18
O
1E-02EN
Resetting the Storage Operation
Press SHIFT+STORE STOP (STORE RESET). The STORE STOP key turns off.
• If the storage operation has been paused
This instrument finishes writing stored data to a file and closes the file.
• If the storage operation has automatically stopped
When the storage operation stops automatically, this instrument finishes writing stored data to a file
and closes the file. Therefore, the reset operation performs no file operations.
Note
If you do not reset storage, you will not be able to start it again.
16.4 Starting, Stopping, and Resetting Storage
To Next Page
Loading...
