YOKOGAWA WT1801E - Configuring TCP;IP Settings

20-3
IM WT18 O 1E-02EN
20.2 Configuring TCP/IP Settings
This section explains the following TCP/IP settings for connecting this instrument to a network:
• DHCP
IP address, subnet mask, and default gateway
• DNS
Domain name, DNS server IP address, and domain suffix
► “TCP/IP (TCP/IP)” in the features guide
Configuring TCP/IP Settings (TCP/IP)
Press UTILITY, the Network soft key, and then the TCP/IP soft key to display the following screen.
Set the DHCP (OFF, ON).
Set these when DHCP is set to OFF.
• IP address
• Subnet mask
• Default gateway
These are displayed when DNS is set to ON or Auto.
• Domain name
• DNS server IP address
(1: primary, 2: secondary)
• Domain suffix
(1: primary, 2: secondary)
Applies the settings
Set the DNS (OFF, ON, Auto).
• OFF: The DNS is disabled.
• ON: The DNS is enabled. Set the domain name, and the DNS server’s primary and
secondary IP addresses and domain suffixes.
• Auto: The DNS is enabled. Set the domain suffixes. The domain name and the DNS server
IP addresses are set automatically. The Auto option is only displayed when DHCP is
set to ON.