YOKOGAWA WT1801E - Displaying the Setup Parameter List

1-22
IM WT18 O 1E-02EN
1.18 Displaying the Setup Parameter List
This section explains how to display a list of setup parameters.
► “Displaying the Setup Parameter List (INPUT INFO)” in the features guide
Info Form Menu
1. Press INPUT INFO. The INPUT INFO key illuminates and the split display appears.
The top half of the screen displays the setup parameter list. Press INPUT INFO again to clear the setup
parameter list and display the previous screen.
2.
Hold down FORM until the Info Form menu appears.
Input element or measurement range settings are displayed.
Select Power Element
Settings.
Input Element Settings List
Select Range Settings.
Measurement Range Settings List