16-1
IM WT18
O
1E-02EN
16.1 Configuring Storage Control
This section explains the following settings for storage control:
• Storage mode
• Storage count
• Confirming and optimizing the maximum storage count
• Storage interval
• Scheduled times for real-time storage
• Trigger event (synchronization to a user-defined event)
• Storage of numeric data when storage starts
► “Storage Control (Control Settings)” in the features guide
Control Settings Menu
Press SHIFT+STORE START (STORE SET) and then the Control Settings soft key to display one of
the menus shown below. The menu that appears varies depending on the storage mode setting that
you have specified.
Manual Storage Mode
Set Store Mode to Manual.
Set the storage count (Infinite, 1 to 9999999).
Confirms and optimizes the maximum storage count
Set the storage interval.
Select whether to store numeric data when storage starts.
This soft key is displayed when Interval is set to a value other than 00 : 00 : 00.
Confirming and Optimizing the Maximum Storage Count
Press the Optimize Count soft key to display the following screen.
Maximum storage count (0 to the maximum number of times that data can be stored to the save
destination)
*
* The maximum number of times that storage can be performed depends on the number of stored items that
you have set and the free space at the save destination.
For details on how to set the stored items, see section 16.2. For details on how to set the save destination,
see section 16.3.
Even if you have specified a USB memory device as the save destination, if you remove the USB memory
device, the save destination switches automatically to the internal RAM disk. If you close this screen and
then open it again by pressing the Optimize Count soft key, the maximum storage count changes to the
value determined by the internal RAM disk
,
s free space.
Sets the storage count
The storage count is set to the maximum storage count
displayed to the left.
Setting the Storage Interval
Press the Interval soft key to display the following screen.
Set the storage interval
(00 hours : 00 minutes : 00 seconds to 99 hours : 59 minutes : 59 seconds).
Chapter 16 Storing Data
To Next Page
Loading...
