20-8
IM WT18
O
1E-02EN
20.5 Connecting to a Network Drive
This section explains the following settings for saving and loading various data of this instrument from
a network drive (FTP server):
• FTP server (file server)
• Login name
• Password
• Turning FTP passive mode on and off
• Timeout
• Connecting to and disconnecting from a network drive
► “Network Drive (Net Drive)” in the features guide
Configuring Network Drive (Net Drive) Settings and Connecting
to It
Press UTILITY, the Network soft key, and then the Net Drive soft key to display the following menu.
Set the FTP server’s host name.
Set the login name (up to 32 characters).
Set the password (up to 32 characters).
Turns FTP passive mode on and off
Set the timeout value (1 to 3600 s).
Disconnects this instrument from the network drive
(FTP server)
Connects this instrument to the network drive (FTP
server)