YOKOGAWA WT1801E - Saving Setup Parameters

17-3
IM WT18 O 1E-02EN
17.2 Saving Setup Parameters
This section explains the following settings for saving setup parameters:
• Save destination
• Auto naming
• File name
• Comment
► “Saving Setup Data (Save Setup)” in the features guide
Save Setup Menu
Press FILE and then the Save Setup soft key to display the following menu.
Set the save destination.
Set the auto naming method (OFF, Numbering, Date).
Set a comment.
Set the file name.
You can set the file name that is used when Auto Naming is set to OFF. This is also used as
the common file name when Auto Naming is set to Numbering.
Saves the data
Setting the Save Destination (File List)
Press the File List soft key to display the following screen.
Operation menu
The destination storage medium
(drive) or folder
Use the cursor
keys (▲▼) to move the
cursor, and press SET to select the
destination.
File list
Note
For details on how to move between the operation menu and the file list and how to operate
the operation menu, see section 17.6.