YOKOGAWA WT1801E - Setting the Custom Display

6-12
IM WT18 O 1E-02EN
6.7 Setting the Custom Display
This section explains the following Custom display settings:
• Loading of display configuration files
• Loading of background files
• Display configuration
Total items, items per page, custom items (item number, measurement function, element and wiring
unit, harmonic order, display position, font size, font color), saving custom display configuration files
• Turning the display frame on and off
► “Custom Display (Custom)” in the features guide
1.
Follow the procedure in section 6.1 to set the numeric data display format to Custom.
Custom Items Menu
2.
Press ITEM to display the following menu.
If the setup parameter list is being displayed (the INPUT INFO key is illuminated), the Info Items menu may
be displayed. If this happens, press ITEM again.
Loads a display configuration file
Turns the display frame on and off
Loads a background file
Loads display configuration and
background files at the same time
► page 6-14
Configure the display configuration.
You can load files for the custom display.
Display configuration files: .txt files
Background files: .bmp files
• You can use the “Edit Items” menu described
below to change the display configuration that
you have loaded.
• To load both a display configuration file and
background file at the same time, load the
display configuration file.