6-9
IM WT18
O
1E-02EN
6.5 Changing the All Items Display
This section explains the following All Items display settings:
• Harmonic order
• Turning the display of all element and all wiring unit data on and off
• Turning the display frame on and off
► “All Display (All Items)” in the features guide
1.
Follow the procedure in section 6.1 to set the numeric data display format to the
All Items
display.
Numeric (All) Menu
2.
Press ITEM to display the following menu.
If the setup parameter list is being displayed (the INPUT INFO key is illuminated), the Info Items menu may
be displayed. If this happens, press ITEM again.
In step 1, you can also display the Numeric (All) menu by pressing NUMERIC, ITEM, and then repeatedly
pressing NUMERIC.
Turns the display of numeric data of all elements or all wiring units on and off
If the total number of elements or wiring units is 7 or more, set this to ON when you want to
display the numeric data of all elements or all wiring units.
Turns the display frame on and off
Set the harmonic order (Total, 0 to 500; /G5 or /G6 option).
You can set this setting only when you have selected the page of a measurement function
includes a harmonic order. For details on how to switch pages, see section 6.2.
Note
On the All Items display, you cannot select individual display items and change their measurement function,
element, or wiring unit. If you switch to the Matrix display, you can change the measurement functions,
elements, and wiring units using the displayed table (see section 6.4).
To Next Page
Loading...
