YOKOGAWA WT1801E - Accessing this Instrument from a PC (FTP Server)

20-4
IM WT18 O 1E-02EN
20.3 Accessing this instrument from a PC (FTP
Server)
This section explains the following settings for accessing this instrument from a PC on a network:
• User name
• Password
• Timeout
• FTP client software
► “FTP Server (FTP Server)” in the features guide
Configuring FTP Server Settings (FTP/Web Server)
Press UTILITY, the Network soft key, and then the FT/WebP Server soft key to display the following
menu.
Set the user name (up to 32 characters).
Set the password (up to 32 characters).
Set the timeout value (30 to 3600 s).
Applies the settings
FTP Client Software
Start an FTP client on a PC.
Enter the user name and password that you entered on the screen shown above to connect to this
instrument.
Note
If you set the user name to “anonymous,” you can access this instrument without entering a password.