1-17
IM WT18
O
1E-02EN
1.13 Setting Line Filters
This section explains the following settings for line filters:
• Turning line filters on and off
• Cutoff frequency
► “Line Filter (LINE FILTER)” in the features guide
Line Filter Menu
Press LINE FILTER to display the following menu.
Configure the line filter settings:
• Turn the line filter on or off.
• Set the cutoff frequency (0.1kHz to 100.0kHz in steps of 0.1 kHz, 300kHz, 1MHz).
Copies the line filter setting
The line filter setting of the input element that is indicated by the cursor is copied to all the
input elements in that element’s wiring unit.
Cursor (use the ◄► cursor keys to move it)
To Next Page
Loading...
