8-1
IM WT18
O
1E-02EN
8.1 Setting Independent Integration
This section explains the following settings for independent integration. If you turn independent
integration on, you can start, stop, and reset integration for each input element separately.
• Turning independent integration on and off
• Element that independent integration will be performed on
► “Enabling or Disabling Independent Integration (Independent Control)” in the features guide
Integ Menu
Press INTEG to display the following menu.
Select the elements that independent integration will be performed on.
*
This soft key is displayed when Independent Control is set to ON.
The input elements that independent integration will be performed on are displayed.
Turns independent integration on and off
* Even if you select input elements that independent integration will be performed on,
independent integration may not be performed due to the wiring system setting or the
independent input element configuration (see the features guide).
Selecting the Element That Independent Integration Will Be
Performed On (Element Object)
Press the Element Object soft key to display the following screen.
Selects all input elements
Clears all selected input elements
Select the check boxes for the input
elements that you want independent
integration to be performed on.
Chapter 8 Integrated Power (Watt hour)
To Next Page
Loading...
Need help?
General
