17-11
IM WT18
O
1E-02EN
Setting the Type of Files to List (Filter)
Select Filter on the operation menu to display the following screen.
Set the type of file to list.
File Type
*
.
*
All files
*
.SET Setup parameter files
*
.CSV Numeric data files (ASCII format),
storage data files (ASCII format), and
waveform display data files (ASCII format)
*
.WTS Storage data files (binary format)
*
.HDS Storage header files (binary format)
*
.BMP Screen image data files (BMP format) and custom display background files
*
.PNG Screen image data files (PNG format)
*
.JPG Screen image data files (JPEG format)
*
.TXT Custom display configuration files
Changing the Storage Medium or Drive (Change Drive)
Select Change Drive on the operation menu to display the following screen.
Changes the storage medium
(drive)
Storage Medium (Drive) Type
RAM-0 Internal RAM disk of this instrument
USB-0 USB memory device that was detected first
USB-1 USB memory device that was detected second
Network Network drive
Note
You can also change the storage medium by highlighting the storage medium (drive) you want to change to
in the file list and pressing SET.
17.6 File Operations
To Next Page
Loading...
