YOKOGAWA WT1801E - Page 92

15-8
IM WT18 O 1E-02EN
ELEMENT Key
3.
Press ESC to clear the menu.
Displayed in the upper left of the numeric data display screen
Voltage measurement range and measurement mode
Current measurement range and measurement mode
Changing the Element and Wiring Unit (Horizontal direction)
4.
Use the cursor keys (◄►)toselectthecolumnthatyouwanttochange.
5.
Press the ELEMENT key for displaying numeric data to select the element and wiring unit that
you want to display.
In high speed data capturing, the elements and wiring unit configurations are the same on all four pages. If
you change the element and wiring unit configuration on one page, the configuration changes on the other
pages as well.
ELEMENT key for displaying
numeric data
Cursor keys
PAGE▲▼ keys
15.3 Changing the Displayed Items for High Speed Data Capturing