Zebra 110XiIII Plus Series - Corrective Maintenance; Tools Required for Corrective Maintenance; Test Equipment Required; Printer Parts and Locations

Page 4-12 110XiIIIPlus Maintenance Manual 13185L-002 Rev. A 1/24/06
Section 4 Maintenance
Corrective Maintenance
Tools Required for Corrective Maintenance
You need a complete set of technician’s tools, including a flat-blade and Phillips
screwdrivers, American standard and metric nut drivers, American standard and metric
Allen wrenches, combination wrenches, wire cutters, and two special tools:
• Spring scale, 0–2250 g (Zebra part number 11303)
• Spindle torque adjustment kit (Zebra part number 01773)
Test Equipment Required
• Multimeter and test leads
• Antistatic mat and antistatic wrist strap for removing static sensitive components.
Printer Parts and Locations
External Components
Refer to Figure 4-3 to familiarize yourself with the external parts of the printer.
Figure 4-3. External Printer Component Orientation
Media Cover
(Right-Hand Side)
Front
of Printer
Control
Panel
Right
Electronics Cover
(Left-Hand Side)
Power Switch
AC Power Cord
Connection
Left
Screws
Rear
DB-9 Serial
Interface
Connector
Parallel
Interface
Connector
USB
Connector
Rear View