13185L-002 Rev. A 1/24/06 110XiIIIPlus Maintenance Manual Page 1-1
System Description Section 1
Section 1
System Description
Description
The Zebra 110XiIIIPlusâ„¢-Series thermal transfer demand printers are versatile label and
ticket printers designed to print high-quality bar codes, various sizes and styles of
alphanumeric characters, and graphics in either Thermal Transfer or Direct Thermal
Mode. The 110XiIIIPlus-Series printers have the flexibility to meet a variety of
applications. The Zebra Programming Language II (ZPL II) allows the programmer to
format the printed material. ZPL II is transparent to protocol converters and allows the
110XiIIIPlus-Series printers to be integrated easily with most systems and host
mainframes.
Scope
This manual contains the information necessary for the proper maintenance of the
Zebra 110XiIIIPlus-Series of printers. Information presented applies to all models unless
otherwise indicated.
Section 1 System Description provides an overview of the contents of this maintenance
manual, as well as overall description and specifications of the printers.
Section 2 Operation Overview details the printer operator controls, power and data cable
hookup, loading supplies in all modes, setting up software, calibration, and configuration.
Section 3 Troubleshooting presents the diagnostic tests that are built into the printers.
Examples of the labels that print for most of these diagnostic tests are illustrated.
Troubleshooting tables showing symptoms, diagnosis, and action assist the service
technician in quickly locating and repairing a printer fault. Example labels illustrate
several common misalignment conditions and the best methods of adjustment.
Section 4 Maintenance discusses recommended cleaning procedures for the printer and
printhead. Recommended cleaning agents and a preventive maintenance schedule are
specified. Disassembly, replacement, and reassembly instructions for the printers are
provided. Required tools and test equipment are specified. Adjustment procedures are
provided along with the required tensions, torque, and tolerances. Instructions on AC
power fuse replacement are also contained in this section.
Option Kits provides disassembly, installation, and reassembly instructions for the option
kits. Required tools and test equipment are specified. Adjustment procedures are provided
along with the required tensions, torque, and tolerances.
Section 5 Maintenance and Assembly Drawings provides the assembly drawing and
parts lists.
This manual is intended to supplement the printer’s Users Guide by providing additional
information to aid the service technician in troubleshooting and maintaining the printer.
To Next Page
Loading...
Need help?
General
