13185L-002 Rev. A 1/24/06 110XiIIIPlus Maintenance Manual Page 2-25
Operations Overview Section 2
Press NEXT/SAVE to display TEAR OFF or PRINT SPEED (refer to Set Tear-Off
Position on page 2-25).
Set Print Speed
The Print Speed setting adjusts the speed of printing.
Press the right oval key to increase the speed or the left oval key to decrease the speed.
Each press of the key changes the speed by one ips (inch per second).
Press NEXT/SAVE to display TEAR-OFF.
Set Tear-Off Position
The Tear-Off position adjusts the position of the media over the peel bar after printing.
Press the right oval key to increase the value or the left oval key to decrease the value.
Each press of the key moves the tear-off position by four dot rows (positive values move
the media farther out over the peel bar).
Press NEXT/SAVE to display PRINT MODE.
Default: +4
Range: 0 to +30 (In tenths)
DARKNESS 8.1
-+
Note • The next menu item is Tear-Off. Proceed to Set Tear-Off Position on
page 2-25.
The next menu item is Print Speed.
PRINT SPEED
-2 IPS +
TEAR-OFF +000
-+
Note • Pressing the oval keys has no effect in the Rewind Mode.
Default: +0
Range: –120 to +120
To Next Page
Loading...
Need help?
General
