Zebra DS8108

A - 14 DS8108 Digital Scanner Product Reference Guide
IDC Captured Image Brighten 654 F1h 8Eh Enable 13-14
IDC Captured Image Sharpen 658 F1h 92h Enable 13-15
IDC Border Type 829 F2h 3Dh None 13-16
IDC Delay Time 830 F2h 3Eh 000 13-17
IDC Zoom Limit 651 F1h 8Bh 000 13-17
IDC Maximum Rotation 652 F1h 8Ch 00 13-18
DigiMarc Parameters
Enable/Disable DigiMarc N/A N/A Disable 14-2
DL Parsing Parameters
Driver’s License Parsing N/A N/A No Driver’s License Parsing 15-2
Parsing Driver’s License Data Fields N/A N/A N/A 15-3
Driver’s License Parse Field Bar
Codes
N/A N/A N/A 15-4
AAMVA Parse Field Bar Codes N/A N/A N/A 15-7
Set Default Parameter N/A N/A N/A 15-17
Output Gender as M or F N/A N/A N/A 15-17
Date Format N/A N/A CCYYMMDD 15-18
No Separator N/A N/A N/A 15-19
Send Keystroke
Control Characters
Keyboard Characters
N/A N/A N/A
15-20
15-24
Parsing Rule Example N/A N/A N/A 15-39
Embedded Driver’s License Parsing
ADF Example
N/A N/A N/A 15-43
Table A-1 Parameter Defaults (Continued)
Parameter
Parameter
Number
1
SSI
Number
2
Default
Page
Number
1. Parameter number decimal values are used for programming via RSM commands.
2. SSI number hex values are used for programming via SSI commands.